Rebuild of B-17G 44-85734 "Liberty Belle"

Post here with anything to do with warbirds, those fine vintage flying machines.
Lucky 13
Posts: 90
Joined: Mon Jul 13, 2009 4:22 pm
Location: United States
Contact:

Rebuild of B-17G 44-85734 "Liberty Belle"

Post by Lucky 13 »

Here are some photos of the work, I am doing on the tail of Liberty Belle hope y'all enjoyImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageI want to say a special thanks to Don for letting me be part of the rebuild of Liberty Belle and now y'all know why I have not made a lot of progress on Lucky 13
Keep the show on the road.
aerovin2
Site Admin
Posts: 883
Joined: Sun Aug 01, 2004 9:03 pm
Location: Lincoln, California
Contact:

Re: Rebuild of B-17G 44-85734 "Liberty Belle"

Post by aerovin2 »

Thanks Ray, for posting those photos. Shows the progress in great detail.
Scott Thompson
Aero Vintage Books
http://www.aerovintage.com

"The Webmaster, More or Less"
menards2
Posts: 38
Joined: Thu Jan 23, 2014 11:25 am

Re: Rebuild of B-17G 44-85734 "Liberty Belle"

Post by menards2 »

SO what will be the ultimate outcome here? Is the Liberty Bell going to be rebuilt? Or are the leftover bits from the Liberty Bell being rebuilt and will assume another identity as another bird? With all that scratch building that is needed...I mean why not make two? or five? or an even dozen? make it a bakers dozen. After all the laws of economics say u'll make up the cost with volume right?
User avatar
DryMartini
Posts: 640
Joined: Wed Sep 22, 2004 3:00 pm
Location: Palatine, Illinois
Contact:

Re: Rebuild of B-17G 44-85734 "Liberty Belle"

Post by DryMartini »


Problem is you need to find people with disposable cash.

When we run extrusions, we typically get buy-in for 4 or 5 planes
worth of material. Costs per extrusion per plane can be between $1200 and
$5200, depending on the extrusion. Then, understand that there are 25
main extrusions, plus dozens of others. Adds up quickly.

And don't forget the interested parties who, when they find out that
a B-17 project costs more than $25,000, lose interest altogether.
They think that there are dozens sitting in Arizona somewhere.
:roll:
-Bill
B-17E 41-2595 "Desert Rat" Restoration Team
aerovin2
Site Admin
Posts: 883
Joined: Sun Aug 01, 2004 9:03 pm
Location: Lincoln, California
Contact:

Re: Rebuild of B-17G 44-85734 "Liberty Belle"

Post by aerovin2 »

menards2 wrote:SO what will be the ultimate outcome here? Is the Liberty Bell going to be rebuilt? Or are the leftover bits from the Liberty Bell being rebuilt and will assume another identity as another bird? With all that scratch building that is needed...I mean why not make two? or five? or an even dozen? make it a bakers dozen. After all the laws of economics say u'll make up the cost with volume right?
My understanding is that Liberty Belle is being rebuilt from the usable parts of the burnt airframe and will fly again as 44-85734. Hopefully we will get our Douglas, Georgia, correspondent (Chuck) to chime in here with an update sooner or later.

And, as noted above, there is much cooperative effort going on among several restoration groups to coordinate part production, a short but not exclusive list being: B-17E 41-2595 Desert Rat, B-17G 44-85790, B-17G 44-85734 Liberty Belle, the B-17C project, and B-17F 42-3455 Lucky 13.
Scott Thompson
Aero Vintage Books
http://www.aerovintage.com

"The Webmaster, More or Less"
Chuck Giese
Posts: 73
Joined: Thu Nov 17, 2005 9:06 pm

Re: Rebuild of B-17G 44-85734 "Liberty Belle"

Post by Chuck Giese »

Hi all,

Part of my job is the procurement of parts. Since the summer of 2011, I've been instructed that any time we have parts, extrusions or tubes made or purchased, I am to buy sufficient for two airplanes. The intent is to have both Liberty Belle and the Labrador B-17 restored, first priority being the Liberty Belle.
Chuck Giese
menards2
Posts: 38
Joined: Thu Jan 23, 2014 11:25 am

Re: Rebuild of B-17G 44-85734 "Liberty Belle"

Post by menards2 »

Chuck Giese wrote:Hi all,

Part of my job is the procurement of parts. Since the summer of 2011, I've been instructed that any time we have parts, extrusions or tubes made or purchased, I am to buy sufficient for two airplanes. The intent is to have both Liberty Belle and the Labrador B-17 restored, first priority being the Liberty Belle.
Did the Liberty Foundation have the Liberty Bell insured?
Chuck Giese
Posts: 73
Joined: Thu Nov 17, 2005 9:06 pm

Re: Rebuild of B-17G 44-85734 "Liberty Belle"

Post by Chuck Giese »

menards2 wrote:
Did the Liberty Foundation have the Liberty Bell insured?
You would have to ask the Liberty Foundation that question. I don't speak for them on financial or operational issues. All of my restoration work is for Brooks Aviation.
Chuck Giese
Lucky 13
Posts: 90
Joined: Mon Jul 13, 2009 4:22 pm
Location: United States
Contact:

Re: Rebuild of B-17G 44-85734 "Liberty Belle"

Post by Lucky 13 »

Here are some photo's of the work I have been doing on Liberty BelleImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageAs one can see I have been busy!!
Keep the show on the road.
Dave
Posts: 120
Joined: Tue Oct 26, 2004 3:16 am
Location: U.K

Re: Rebuild of B-17G 44-85734 "Liberty Belle"

Post by Dave »

Brilliant
Dave
User avatar
Chris Brame
Posts: 575
Joined: Mon Aug 28, 2006 12:08 am
Location: Yucca Valley, CA

Re: Rebuild of B-17G 44-85734 "Liberty Belle"

Post by Chris Brame »

Lucky 13 wrote:As one can see I have been busy!!
That's the best kind of busy! Thanks for the update.
TAdan
Posts: 79
Joined: Sat Jan 31, 2009 7:22 am
Location: NJ

Re: Rebuild of B-17G 44-85734 "Liberty Belle"

Post by TAdan »

Thanks so much for the update. Really coming along nicely.
So many warbirds so little time.
User avatar
OldBillB17F
Posts: 125
Joined: Tue Jul 04, 2006 10:13 am
Location: West of Kansas City, MO

Re: Rebuild of B-17G 44-85734 "Liberty Belle"

Post by OldBillB17F »

Below is the link to the Twisted Piston blog that is documenting the restoration of Liberty Belle. It is updated regularly. Looks to be the GA location for this project, and not the SC location as documented in this thread.

http://thetwistedpiston.com/b-17-libert ... arch-2018/
cvairwerks
Posts: 42
Joined: Tue Dec 04, 2012 12:28 pm

Re: Rebuild of B-17G 44-85734 "Liberty Belle"

Post by cvairwerks »

Hope they can get the site up soon. It appears to have gone down right after you posted.
Post Reply